Padmaja Expo
The ultimate Source  for Chemistry
   Home      anti seizing lubricant high temperature lubricant
 
Anti seize high temperature grease lubricant no 09

PRODUCT DESCRIPTION 

Permalube Copper Anti-Seize Lubricant is a high temperature,
premium quality copper anti-seize and thread lubricant. It
contains a high percentage of micro-fine copper flakes in a
semi-synthetic, grease carrier and fortified with high quality
rust and corrosion inhibitors.
PRODUCT BENEFITS
Permalube Copper Anti-Seize was designed specifically for
use on stainless steel or similar alloys. It protects threaded
fasteners and fittings from heat, freezing, seizure or galling at
temperatures from -30°F to 1800°F. It may be used on
pumps, sensors, valves, nuts and bolts where extreme
conditions of heat exist. Permalube Copper Anti-Seize also
provides good electrical conductivity.
 
TYPICAL APPLICATIONS

• Spark plug threads installed into aluminum heads
• Exhaust manifold and engine bolts
• Oxygen sensors
• Knock sensors
• Thermostat housing bolts
• Fuel filter fittings
• Battery cable connections
 
DIRECTIONS FOR USE

1. Clean mating surfaces before application.
2. For best results, apply to clean, dry surfaces.
3. Clean surfaces with Permatex Brake & Parts Cleaner.
4. Wire brush any loose surface rust.
5 Apply Copper Anti-Seize to the parts that require
protection.
6. Reassemble parts using normal torque values.
7. Wipe off excess material.
For Cleanup
1. Clean parts with disposable towel.
 
PROPERTIES OF MATERIAL
Typical Value
Chemical Type Grease
Appearance Copper metallic paste
Odor Light petroleum
Specific Gravity 1.2
Temperature Range, _C (_F) -22(-30) to 982(1800)
Viscosity, cPs 200,000 (base)
Flash Point, °C(°F) 149(300)
NFPA 704 Flammability Rating 1
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a lubricant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION/ Packing-
Part Number Container Size
 09500   500 gms  brush-top bottle
 09250  250 gms . brush-top bottle
 0925  25 gms  carded tube
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8_ to 28_C
(46_ to 82_F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable.and true and given in good faith
with no liablity to us from use of the product